The AR0144 is a 1/4-inch 1.0 Mp CMOS digital image sensor with an active-pixel array of 1280H x 800V. It incorporates a new innovative global shutter pixel design optimized for accurate and fast capture of mov-ing scenes. The sensor produces clear, low noise images in both low-light and bright scenes. It includes sophisticated camera functions such as auto exposure control, windowing, row skip mode, column-skip mode, pixel-binning and both video and single frame modes. It is programmable through a simple two-wire serial interface. The AR0144 produces extraordinarily clear, sharp digital pictures.
• Superior low-light and IR performance
• HD video (720p@60fps)
• 2-lane MIPI or Parallel data interface
• Automatic black Level Calibration (ABLC)
• Programmable control for Region Of Interest (ROI)
• Horizontal and vertical mirroring, windowing and
pixel binning
• On chip auto exposure control for any
programmable ROI
• 5x5 Statistics engine for any programmable ROI
• Flexible control for row and column skip mode
• On-chip slave or trigger mode for synchronization
• Built in strobe control
• On chip Phase Lock loop (PLL)
• On-chip slave or trigger mode for synchronization
Parameter Typical Value
Optical format 1/4-inch (4.5 mm)
Active pixels 1280H x 800V = 1.0 Mp
Pixel size 3.0 m
Color filter array RGB Bayer or Monochrome
Chief Ray Angle 0 or 20°
Shutter type Global shutter
Input clock range 6 – 64 MHz
Output pixel clock (maximum) 74.25 MHz
Output:
Serial MIPI, 2-Lane
Parallel 12-bit
Frame rate:
Full resolution 60 fps
720p 66 fps
Responsivity:
Monochrome 3.6 V/lux-sec
Color 3.1 V/lux-sec
SNRMAX 38 dB
Dynamic range 63.9 dB
Supply voltage:
I/O 1.8 or 2.8 V
Digital 1.2 V
Analog 2.8 V
Power consumption <250mW
Operating temperature:
–40°C to +85°C (ambient)
–40°C to +105°C (junction)
Package options:
5.6 x 5.6 mm 69-ball CSP
Bare die
